My iPhone 4S sound is not working? What can I do?
It says that I have plugged in headphones but I haven't. What should I do?
Check in your phone settings if your phone ringer is not on mute. There's also a little mute switch on the side of your phone which if it is orange puts it on mute. If not, do a factory reset which will erase everything so make sure you backup and restore everything on itunes so you don't lose anything. If it that then does not work send it to repairs if its still under warranty and has no signs of physical damage.
I was researching the issue you are describing
and found a resource that might help. It is an
article called iPhone: Can't hear through the
receiver or speakers found here: http://
support.apple.com/kb/TS1630.
I know your article is intermitent but I
recommend the article because it does a great
job of helping to isolate sound issues to either
software or hardware.
Resolution
1. Verify that there's nothing plugged in to
the headset jack, including headsets,
headphones, or adapters.
2. Make sure the Ring/Silent switch is not
switched to silent.
3. While on the Home screen, adjust the
volume buttons. If you see the icon below,
indicating that headphones are attached, there
may be debris or an object lodged in the
headset jack:
4. Check the headset jack. If there's an object
lodged in the headset jack that is not easily
removed, have the iPhone serviced to remove
object.
5. For Original iPhone: If there's light debris,
such as lint, in the headset jack, try connecting
a pair of headphones to the headset jack and
then remove the headphones. Repeat this
several times to remove the debris.
6. If you have installed a protective film on
the display, either ensure that the receiver is
not covered or remove the film completely.
7. Check the receiver mesh (which is on the
top front of the device, above the display). If
it appears blocked, use a clean, small, dry,
soft-bristled brush to carefully and gently
brush away any debris.
8. If you have paired with a Bluetooth headset
that is nearby, either use the headset or turn
Bluetooth off (chooseSettings > General >
Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve
the issue, try restoring the device.
11. If the issue persists, go to the Service
Answer Center - iPhone for information on
service.
- YouTube sound not working when iphone is on silent? I've had my iPhone 4 for over a year now, and I've never had this problem. It started today, if I try to watch a YouTube video without headphones and the phone is on silent, there's no audio. But if I turn the ringer on there's audio. Obviously I've looked at the volume levels, and they're up. Like i said its only started today and it's very frustrating!
- Why is my iPhone's left speaker (for sound) not working? I had recently damaged my phone by dropping it on pavement (approximately 3 feet), and it slid about 20 feet. Just today, I noticed the the left speaker on the bottom of the phone is not working. I have a feeling that it's not working because of the impact of the phone falling (I had a snap-on case at the time).Is there any way for it to get fixed without replacing the whole phone? And are there any good websites for parts? -Thanks
- What do i do if the sound for my videos on my iphone is not working? Whenever i make videos, there's no sound present. But when i record voicenotes, or listen to music the sound works, it just doesn't work for recording videos anymore. What is wrong?
- Sound is not working on my iphone. What can I do? There's no sound when I open an app or try to play a video. The buttons on the side aren't doing anything and the silent switch isn't on. Does anyone know what I can do?